Thermal insulation coating 1
The series of products are mainly made of high quality synthetic emulsion based on high quality pigments, fillers and additives, refined by advanced technology. The characteristics of The series of products are non-toxic and tasteless, with good washability, strong adhesion, high covering rate, good alkali resistance, safety, environmental protection and convenient construction. The typical characteristics of D-9755-600 D-9755-610
Thermal insulation coating 2
1, suitable for industrial machinery and equipment, beer bottle washing machine, packing machine, vulcanizing machine, oven, petrochemical equipment, textile machine, boiler, VAT, overflow reactor and high temperature steam pipes, valves, mold, tanker needs insulation facilities; 2, the use temperature: -30, &mdash, 250 degrees. 3, coating thickness according to equipment temperature formulation, general 200 degrees or so of the steam pipeline, 3mm thick coating surface temperature dropped to about 70 degrees Celsius, 5mm thickness surface dropped to about 60 degrees celsius. 4, energy-saving effect is amazing! Greatly reduce production costs, improve economic efficiency, and reduce equipment and workshop temperature, eliminate hidden dangers of accidents, improve the working environment of a workshop, improve work efficiency, and prolong the service life of the equipment, too. 5, dosage: 3mm thickness of about 3L6, use: A, oil, clean the dust on the surface (surface rusty to brush a layer of anti rust paint), to dry; optimum temperature B, construction surface is 15— 60 degrees Celsius, the air humidity is less than 80%, each time the coating thickness is 1— 3mm, drying after smearing again, until the required thickness; C should avoid the equipment to work in the coating is not completely dry curing conditions; D, construction before mixing paint, “ can add appropriate amount of water, use the paint brush smeared or water scraper scraping work, can also be sprayed;
Thermal insulation coating 3
This product is made of high-quality sepiolite fiber, Russia, rare earth, aluminum silicate fiber and other refractory materials adding proper high temperature adhesive and refined. (product paste and dry two) dried into a closed pore structure of reticular fiber insulation materials, products were silicate, magnesium silicate, sepiolite, rare earth insulation coatings, this product has low thermal conductivity, high bonding strength, no shedding, no cracking, light weight, the construction is not restricted by equipment acid, alkali corrosion, oil, nontoxic and harmless to human body and no equipment corrosion. Two, the scope of application of For different shapes of tanks, spheres, reducing pipes and large and medium-sized pipes insulation. Three, the main technical indexes of The slurry density of &ge 800kg/m3 &le 220kg/m3; dry density; volume shrinkage rate of &le 23.8% &ge 77kpa; bonding strength; thermal conductivity of &le 0.053w/m.k PH = 10; confused
Thermal insulation coating 4
Interior wall paint is used for general decoration latex paint. Emulsion paint is emulsion coating, according to the different substrate, divided into two kinds of polyvinyl acetate emulsion and acrylic emulsion. Latex paint with water as a diluent, is a convenient construction, safety, water washable, breathable paint, it can be based on different color schemes to deploy different colors. Categories: water interior wall paint, oil interior wall paint, dry powder type interior wall paint, is a water-based paint, mainly by water, emulsion, pigments, fillers, additives composition of five components. Using the method of First, before painting the substrate to confirm the coating requirements; Second, coating at 5~35 DEG C, the air humidity requirements of coating should be less than 85%; Third, choose the appropriate construction method and construction tools, construction work according to the construction process recommended by ;Fourth, control coating interval, after reaching the re coating time, you can do the next brushing. Too much heavy coating time will result in slow drying at the bottom and wrinkling and other problems. Fifth, please do not mix with organic solvent, acid base, oil and other chemicals. Sixth. Air circulation shall be maintained during construction and the paint shall be kept away from direct sunlight and heat sources. Seventh, in order to avoid contamination of the skin and eyes or inhalation of excessive paint fog, please use masks, gloves and other protective equipment. Eighth. If infected with eyes, rinse immediately with plenty of water and ask a doctor for treatment. Ninth. Place it where children can't get it. The construction technology of Materials for Paint, filler, high stool, scaffolding, putty plate, roller, brush, brush, paint barrels, sandpaper, rubber scraper, putty groove, cloth, silk, cotton and other half. The operating conditions of 1, the surface should be basically dry, the moisture content of the base shall not be greater than 10%. 2, plaster work has been completed, the wall pipe, hole, yin and yang angle advance processed. 3, doors and windows should be installed in advance. 4, a large area should be done before the model, after the acceptance of qualified, can be a large area construction.
Thermal insulation coating 6
Thermal insulation coating 6
Thermal insulation coating 7
Thermal insulation coating 7
Thermal insulation coating 8
Thermal insulation coating 8
Thermal insulation coating 5
Thermal insulation coating 5
Mobile：+8618900000000 Telephone：86-010-12340000
Email：[email protected]
